Hyperbolastic growth models: theory and application
- Mohammad Tabatabai^{1},
- David Keith Williams^{2} and
- Zoran Bursac^{2}Email author
https://doi.org/10.1186/1742-4682-2-14
© Tabatabai et al; licensee BioMed Central Ltd. 2005
Received: 22 October 2004
Accepted: 30 March 2005
Published: 30 March 2005
Abstract
Background
Mathematical models describing growth kinetics are very important for predicting many biological phenomena such as tumor volume, speed of disease progression, and determination of an optimal radiation and/or chemotherapy schedule. Growth models such as logistic, Gompertz, Richards, and Weibull have been extensively studied and applied to a wide range of medical and biological studies. We introduce a class of three and four parameter models called "hyperbolastic models" for accurately predicting and analyzing self-limited growth behavior that occurs e.g. in tumors. To illustrate the application and utility of these models and to gain a more complete understanding of them, we apply them to two sets of data considered in previously published literature.
Results
The results indicate that volumetric tumor growth follows the principle of hyperbolastic growth model type III, and in both applications at least one of the newly proposed models provides a better fit to the data than the classical models used for comparison.
Conclusion
We have developed a new family of growth models that predict the volumetric growth behavior of multicellular tumor spheroids with a high degree of accuracy. We strongly believe that the family of hyperbolastic models can be a valuable predictive tool in many areas of biomedical and epidemiological research such as cancer or stem cell growth and infectious disease outbreaks.
Keywords
1. Introduction
The analysis of growth is an important component of many clinical and biological studies. The evolution of such mathematical functions as Gompertz, logistic, Richards, Weibull and Von Bertalanffy to describe population growth clearly indicates how this field has developed over the years. These models have proved useful for a wide range of growth curves [1]. In the logistic model, the growth curve is symmetric around the point of maximum growth rate and has equal periods of slow and fast growth. In contrast, the Gompertz model does not incorporate the symmetry restriction and has a shorter period of fast growth. Both the logistic and Gompertz have points of inflection that are always at a fixed proportion of their asymptotic population values. A number of recent publications have utilized some of these models. Kansal [2] developed a cellular automation model of proliferative brain tumor growth. This model is able to simulate Gompertzian tumor growth over nearly three orders of magnitude in radius using only four microscopic parameters. Brisbin [3] observed that the description of alligator growth by fixed-shape sigmoid models such as logistic, Gompertz or Von Bertalanffy curves may not be adequate because of the failure of the assumption that a constant curve shape holds across treatment groups. There are many applications of Gompertz, logistic and Von Bertalanffy models to multicellular tumor spheroid (MTS) growth curves [4–9]. Yin [10] introduced the beta growth function for determinate growth and compared it to the logistic, Gompertz, Weibull and Richards models. He showed that the beta function shares several characteristics with the four classic models, but was more suitable for accurate estimation of final biomass and duration of growth. Ricklef [18] investigated the biological implications of the Weibull and Gompertz models of aging. Castro [19] studied a Gompertzian model for cell growth as a function of phenotype using six human tumor cell lines. They concluded that cell growth kinetics can be a phenotypic organization of attached cells. West [20, 21] introduced an ontogenetic theory of growth, which is based on first principles of energy conservation and allocation. A review of these studies reveals that the sigmoid character of the classical three or more parameter growth functions, such as the logistic or Von Bertalanffy, may not adequately fit three-dimensional tumor cell cultures, which often show complex growth patterns. Models that have been found to provide the best fit were modified or generalized versions of the Gompertz or logistic functions. The 1949 data on the polio epidemic [11] provide another classic example of a situation in which none of the above models fit the data very well. Our purpose is to introduce three new growth models that have flexible inflection points and can fit data with different shapes. We apply our proposed models to the 1949 polio epidemic data [11] and Deisboeck's MTS volume data [9] and compare their fit with four classical models: logistic [12], Richards [13], Gompertz [14] and Weibull [15].
2. The Hyperbolastic Model H1
First, we start by considering the following growth curve, which produces flexible asymmetric curves through nonlinear ordinary differential equations of the form
or
with initial condition
P(t_{0}) = P_{0}
where P(t) represents the population size at time t, β is the parameter representing the intrinsic growth rate, θ is a parameter, and M represents the maximum sustainable population (carrying capacity), which is assumed to be constant, though in general the carrying capacity may change over time. For growth curves, β has to be positive, leading to an eventually increasing curve with an asymptote at M; β can be negative only for eventual inhibition curves or decay profiles. We refer to growth rate model (1) as the hyperbolastic differential equation of type I. If θ = 0, then the model (1) reduces to a logistic differential equation and equation (2) reduces to a general logistic model [12]. Solving the equation (1) for the population P gives
where
and arcsinh(t) is the inverse hyperbolic sine function of t. We call the function P(t) in equation (2) the hyperbolastic growth model of type I or simply H1. To reduce the number of parameters, observed values of P_{0} and t_{0} are used to obtain an approximate value of α. Notice that the asymptotic value of P(t) is
From equation (1) we calculate the second derivative
If we set θ = 0, then the second derivative
when
In other words, when the population P reaches half the carrying capacity M, the growth is most rapid and then starts to diminish toward zero. If we assume θ ≠ 0, then the growth is most rapid at the time t*, such that t* satisfies the following equation
If the carrying capacity changes at discrete phases of a hyperbolastic growth, then a bi-hyperbolastic or multi-hyperbolastic model may be appropriate.
3. The Hyperbolastic Model H2
Now we consider an alternative growth curve through a nonlinear hyperbolastic differential equation of the form
with initial condition P(t_{0}) = P_{0} and γ > 0, where tanh stands for hyperbolic tangent function, M is the carrying capacity, and β and γ are parameters. As in the H1 model, parameter β has to be positive for increasing growth curves with an asymptote at M and is negative only for decay profiles. We refer to the growth rate model (3) as the hyperbolastic differential equation of type II.
Solving equation (3) for population size P gives the three parameter model
where
We call the function P(t) in equation (4) the hyperbolastic growth model of type II or simply H2. As in the H1 model, observed values of P_{0} and t_{0} are used to obtain an approximate value of α and to reduce the number of parameters.
Notice from equation (4) that for positive values of β, P(t) approaches M as t tends to infinity and for negative values of β, P(t) approaches zero as t tends to infinity. Moreover, from equation (3), we calculate the second derivative
If γ = 1, then the growth rate is most rapid at time t = t* if the following equality is true
4. The Hyperbolastic Model H3
Finally, we consider a third growth curve through the following nonlinear hyperbolastic differential equation of the form
with initial condition P(t_{0}) = P_{0} where M is the carrying capacity and β, γ and θ are parameters. We refer to model (5) as the hyperbolastic ordinary differential equation of type III.
The solution to equation (5) is a four parameter model
P(t) = M - α EXP[-β t^{ γ }- arcsinh(θ t)] (6)
where
α = (M - P_{0}) EXP[β t_{0}^{ γ }+ arcsinh(θ t_{0})].
We call the function P(t) in equation (6) the hyperbolastic growth model of type III or simply H3. If θ = 0, then this model reduces to the Weibull function [15]. The growth rate is most rapid at time t* such that
If we define the a(t) as the rate of generation of new tumor cells and b(t) as the rate of loss of tumor cells, for instance, then
The growth rate can then be written as
If no tumor cells are lost (b(t) = 0), the tumor size P(t) follows the equation
P(t) = M [β t^{ γ }- arcsinh(θ t)].
5. Application of Hyperbolastic Models
Statistical Analysis
We analyze two data sets by fitting the general logistic model of the form
the Richards model of the form
the Gompertz model of the form
P(t) = M EXP[-α EXP(-M β t)] [14], where
the Weibull model of the form
P(t) = M - α EXP(-β t^{ γ }) [15], where
α = (M - P_{0}) EXP(β t_{0}^{ γ })
and the hyperbolastic models H1, H2, and H3 described above. Obviously some of these models are closely related. Nonetheless, the parameter values may be quite different when these models are fitted to a single set of data. The logistic model used here is a two parameter symmetric model, while the Richards model generalizes the logistic model by introducing an additional parameter (γ) to the equation to deal with asymmetrical growth. The Richards function reduces to the logistic equation if γ = 1. The Gompertz equation, which is a two parameter asymmetric equation, attains its maximum growth rate at an earlier time than the logistic. In the Weibull equation, β and γ are constants defining the shape of the response. In all seven models M is a constant, the maximum value or the upper asymptote, which is estimated by non-linear regression. In each instance we express one model parameter (α) as the function of the other parameters and initial observed value P_{0} at time t_{0}, which allows us to reduce the number of parameters to be estimated and also anchors the first predicted value to the original value observed at the initial time point.
The mean squared error (MSE) and the R^{2} value from the nonlinear regression, as well as the absolute value of the relative error (RE), which was defined as
were used to indicate the prediction accuracy or goodness of fit for all seven fitted models. All models were fitted using SAS v.9.1 PROC NLIN (SAS Institute Inc., Cary, NC) and SPSS v.12.0.1 (SPSS Inc., Chicago, IL). The best fitting functions and their derivatives were plotted using Mathematica v.4.2 (Wolfram Research Inc., Champaign, IL) to find the growth rates and accelerations.
Analysis of the Polio Epidemic Data
Number of observed and predicted polio cases using seven models.
Month | Polio Cases | H1 | H2 | Weibull | H3 | Richards | Logistic | Gompertz |
---|---|---|---|---|---|---|---|---|
0 | 494 | 494 | 494 | 494 | 494 | 494 | 494 | 494 |
1 | 759 | 242.47 | 544.99 | 494.15 | 467.57 | 838.76 | 901.13 | 1112.71 |
2 | 1016 | 278.44 | 720.94 | 505.28 | 452.96 | 1424.12 | 1632.93 | 2224.48 |
3 | 1215 | 526.24 | 1153.82 | 635.10 | 563.29 | 2418.00 | 2924.19 | 4016.77 |
4 | 1619 | 1279.87 | 2218.78 | 1334.67 | 1262.75 | 4105.48 | 5130.07 | 6649.96 |
5 | 2964 | 3506.99 | 4917.77 | 3769.25 | 3730.08 | 6970.11 | 8697.85 | 10223.41 |
6 | 8489 | 9510.12 | 11444.30 | 9859.95 | 9872.33 | 11824.88 | 13987.47 | 14754.76 |
7 | 22377 | 21110.00 | 23267.60 | 20665.19 | 20687.08 | 19913.74 | 20898.37 | 20177.15 |
8 | 32618 | 33011.70 | 34655.40 | 32802.34 | 32777.73 | 31513.43 | 28575.53 | 26352.24 |
9 | 38153 | 39160.25 | 39855.70 | 39775.43 | 39753.72 | 39660.86 | 35708.48 | 33093.26 |
10 | 41462 | 41203.34 | 41247.00 | 41264.73 | 41277.59 | 41382.42 | 41316.48 | 40190.97 |
11 | 42375 | 41763.32 | 41522.90 | 41339.95 | 41358.99 | 41573.16 | 45174.27 | 47437.25 |
Absolute value of the relative error(s), MSE and R^{2} for seven tested models with polio data.
Month | RE(H1) | RE(H2) | RE(W) | RE(H3) | RE(R) | RE(L) | RE(G) |
---|---|---|---|---|---|---|---|
0 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
1 | 0.68 | 0.28 | 0.35 | 0.38 | 0.11 | 0.19 | 0.47 |
2 | 0.73 | 0.29 | 0.50 | 0.55 | 0.40 | 0.61 | 1.19 |
3 | 0.57 | 0.05 | 0.48 | 0.54 | 0.99 | 1.41 | 2.31 |
4 | 0.21 | 0.37 | 0.18 | 0.22 | 1.54 | 2.17 | 3.11 |
5 | 0.18 | 0.66 | 0.27 | 0.26 | 1.35 | 1.93 | 2.45 |
6 | 0.12 | 0.35 | 0.16 | 0.16 | 0.39 | 0.65 | 0.74 |
7 | 0.06 | 0.04 | 0.08 | 0.08 | 0.11 | 0.07 | 0.10 |
8 | 0.01 | 0.06 | 0.01 | 0.01 | 0.03 | 0.12 | 0.19 |
9 | 0.03 | 0.05 | 0.04 | 0.04 | 0.04 | 0.06 | 0.13 |
10 | 0.01 | 0.01 | 0.01 | 0.00 | 0.00 | 0.00 | 0.03 |
11 | 0.01 | 0.02 | 0.02 | 0.02 | 0.02 | 0.07 | 0.12 |
MSE | 6.61 × 10^{5} | 8.72 × 10^{5} | 11.09 × 10^{5} | 12.45 × 10^{5} | 50.21 × 10^{5} | 111.12 × 10^{5} | 223.65 × 10^{5} |
R ^{2} | 0.9983 | 0.9978 | 0.9969 | 0.9969 | 0.9864 | 0.9667 | 0.9336 |
Analysis of the MTS Growth Data
Observed and predicted MTS volume using seven models.
Time(hr) | Volume | H3 | Weibull | H1 | H2 | Gompertz | Logistic | Richards |
---|---|---|---|---|---|---|---|---|
0 | 0.087 | 0.087 | 0.087 | 0.087 | 0.087 | 0.087 | 0.087 | 0.087 |
24 | 0.080 | 0.080 | 0.088 | 0.067 | 0.089 | 0.099 | 0.107 | 0.108 |
48 | 0.082 | 0.083 | 0.096 | 0.093 | 0.099 | 0.116 | 0.132 | 0.134 |
72 | 0.129 | 0.127 | 0.125 | 0.133 | 0.125 | 0.140 | 0.162 | 0.165 |
96 | 0.188 | 0.189 | 0.184 | 0.186 | 0.182 | 0.177 | 0.200 | 0.202 |
120 | 0.255 | 0.256 | 0.259 | 0.251 | 0.261 | 0.234 | 0.245 | 0.245 |
144 | 0.318 | 0.317 | 0.317 | 0.320 | 0.316 | 0.327 | 0.302 | 0.297 |
Absolute value of the relative error(s), MSE and R^{2} for seven tested models with MTS volume data.
Time(hr) | REH3 | REW | REH1 | REH2 | REG | REL | RER |
---|---|---|---|---|---|---|---|
0 | 0.000 | 0.000 | 0.000 | 0.000 | 0.000 | 0.000 | 0.000 |
24 | 0.002 | 0.096 | 0.166 | 0.109 | 0.239 | 0.339 | 0.353 |
48 | 0.016 | 0.168 | 0.132 | 0.201 | 0.416 | 0.607 | 0.634 |
72 | 0.019 | 0.030 | 0.029 | 0.028 | 0.089 | 0.257 | 0.277 |
96 | 0.007 | 0.020 | 0.009 | 0.034 | 0.059 | 0.061 | 0.072 |
120 | 0.002 | 0.016 | 0.016 | 0.022 | 0.083 | 0.038 | 0.038 |
144 | 0.002 | 0.004 | 0.007 | 0.006 | 0.030 | 0.052 | 0.066 |
MSE | 3.33 × 10^{-6} | 74.21 × 10^{-6} | 82.83 × 10^{-6} | 109.2 × 10^{-6} | 464.35 × 10^{-6} | 802.06 × 10^{-6} | 1374.42 × 10^{-6} |
R ^{2} | 0.9998 | 0.9974 | 0.9974 | 0.9957 | 0.9808 | 0.9100 | 0.8972 |
6. Discussion
Obviously no model can accurately describe every biological phenomenon that researchers encounter in their practice and the same is true for our models. Many models have been developed to deal with sigmoid growth [16] and new ones are continuously being proposed. The logistic function is symmetric around the point of inflection. The Richards function is more flexible and can fit asymmetric growth patterns [10, 17]; however, it has more parameters than the logistic function. The Gompertz function has the same number of parameters as the logistic function and the Weibull function has the same number of parameters as the Richards function and both can fit asymmetric growth, but they are not very flexible [10].
The H1 function has one more parameter than the logistic and Gompertz functions, but it is more flexible and can fit asymmetric growth patterns as well as increasing and decreasing growth, as shown in the MTS volume example. The H2 function has the same number of parameters as H1 and can fit asymmetric curves, but it cannot fit decreasing growth patterns, so it is less flexible. The H3 function has the same flexibility as the H1 function at the expense of one more parameter, similar to the Weibull and Richards equations. Some of the flexibility of the H1, H2 and H3 functions is illustrated in Figure 8.
Parameter estimates (with standard errors in parentheses) for H1, H2 and H3 models applied in two examples.
Model | Parameter | Polio Estimate | MTS Estimate |
---|---|---|---|
H1 | M | 41951.4 (603.8) | 0.5633 (0.16) |
β | 3.9 × 10^{-5} (3.06 × 10^{-6} | 0.0395 (0.02) | |
θ | -2.6851 (0.29) | -0.2171 (0.05) | |
H2 | M | 41574.9 (670.6) | 0.3360 (0.03) |
β | 2.9 × 10^{-6} (7.02 × 10^{-7}) | 1.9 × 10^{-5} (4.7 × 10^{-5}) | |
γ | 1.8865 (0.13) | 2.6784 (0.55) | |
H3 | M | 41359.6 (817.5) | 0.5871 (0.02) |
β | 4.11 × 10^{-6} (5.62 × 10^{-6}) | 0.0371 (0.01) | |
γ | 6.18 (0.67) | 0.8575 (0.05) | |
θ | -0.00065 (0.01) | -0.0256 (0.003) |
While the results presented are valid only for the data sets used in this study, these models can have much wider application than shown here. We successfully applied them to several other data sets including craniofacial and stem cell growth data and the results indicate supreme prediction accuracy for the hyperbolastic models. Based on the results presented in this paper and others not shown here, we can say that the H3 model performs the best with cancer cell, craniofacial and stem cell growth data. However, it is reasonable to compare models for fit before deciding on the selection of the "best" one. With appropriate parameter adjustments in H1 or H2, one can derive regression type models for dichotomous or polytomous response variables, and use these models in survival data problems, reliability studies, business applications and many other situations.
Finally, our hyperbolastic models show very promising results. In both the above discussed data sets, they fitted the data with smaller MSE, smaller mean RE and higher prediction accuracy than the logistic, Richards and Gompertz, which were the worst fit models in both cases. Our models are accurate and simple and two of them generalize the logistic and Weibull models. They can be easily implemented and tested in readily available software packages or routines. We strongly believe that choosing a flexible and highly accurate predictive model such as hyperbolastic can significantly improve the outcome of a study and it is the accuracy of a model that determines its utility. We strongly recommend usage of such models to the scientific community and practitioners and urge comparison of them with classical models before decisions on model selection are made.
Declarations
Authors’ Affiliations
References
- Kingland S: The refractory model: The logistic curve and history of population ecology. Quart Rev Biol. 1982, 57: 29-51. 10.1086/412574.View ArticleGoogle Scholar
- Kansal AR, Torquato S, Harsh GR: Simulated brain tumor growth dynamics using a three-dimensional cellular automaton. J Theor Biol. 2000, 203: 367-82. 10.1006/jtbi.2000.2000.View ArticlePubMedGoogle Scholar
- Brisbin IL: Growth curve analyses and their applications to the conservation and captive management of crocodilians. Proceedings of the Ninth Working Meeting of the Crocodile Specialist Group. SSCHUSN, Gland, Switzerland. Edited by: King FW. 1989Google Scholar
- Spratt JA, von Fournier D, Spratt JS: Descelerating growth and human breast cancer. Cancer. 1993, 71: 2013-9.View ArticlePubMedGoogle Scholar
- Marusic M, Bajzer Z, Vuk-Pavlovic S: Tumor growth in vivo and as multicellular spheroids compared by mathematical models. Bull Math Biol. 1994, 56: 617-31.PubMedGoogle Scholar
- Marusic M, Bajzer Z, Freyer JP: Analysis of growth of multicellular tumor spheroids by mathematical models. Cell Prolif. 1994, 27: 73-94.View ArticlePubMedGoogle Scholar
- Olea N, Villalobos M, Nunez MI: Evaluation of the growth rate of MCF-7 breast cancer multicellular spheroids using three mathematical models. Cell Prolif. 1994, 27: 213-23.View ArticlePubMedGoogle Scholar
- Chignola R, Schenetti A, Chiesa E: Oscillating growth patterns of multicellular tumor spheroids. Cell Prolif. 1999, 32: 39-48.View ArticlePubMedGoogle Scholar
- Deisboeck TS, Berens ME, Kansal AR: Pattern of self-organization in tumour systems: complex growth dynamics in a novel brain tumour spheroid model. Cell Prolif. 2001, 34: 115-134. 10.1046/j.1365-2184.2001.00202.x.View ArticlePubMedGoogle Scholar
- Yin X, Goudriaan J, Latinga EA: A flexible sigmoid function of determinate growth. Ann Bot (Lond). 2003, 91: 361-371. 10.1093/aob/mcg029.View ArticleGoogle Scholar
- Paul JR: History of Poliomyelitis. 1971, New Heaven and London: Yale University PressGoogle Scholar
- Verhulst PF: A note on population growth. Correspondence Mathematiques et Physiques. 1838, 10: 113-121.Google Scholar
- Richards FJ: A flexible growth function for empirical use. J of Exper Bot. 1959, 10: 290-300.View ArticleGoogle Scholar
- Gompertz B: On the nature of the function expressive of the law of human mortality, and on a new mode of determining the value of life contingencies. Phil Trans of the Royal Soc. 1825, 182: 513-585.View ArticleGoogle Scholar
- Weibull W: A statistical distribution function of wide applicability. J of Appl Mech. 1951, 18: 293-297.Google Scholar
- Zeide B: Analysis of growth equations. Forest Sci. 1993, 39: 594-616.Google Scholar
- Zhu Q, Cao X, Luo Y: Growth analysis on the process of grain filling in rice. Acta Agronomica Sinica. 1988, 14: 182-193.Google Scholar
- Ricklef RE, Scheuerlein A: Biological implications of the Weibull and Gompertz models of aging. J Gerotol A Biol Sci Med Sci. 2002, 57 (2): B69-B76.View ArticleGoogle Scholar
- Castro MA, Klamt F, Grieneisen V: Gompertzian growth pattern correlated with phenotypic organization of colon carcinoma, malignant glioma and non-small cell lung carcinoma cell lines. Cell Prolif. 2003, 36 (2): 65-73. 10.1046/j.1365-2184.2003.00259.x.View ArticlePubMedGoogle Scholar
- West GB, Brown JH, Enquist BJ: A general model for antogenetic growth. Nature. 2001, 413: 628-631. 10.1038/35098076.View ArticlePubMedGoogle Scholar
- West GB, Brown JH, Enquist BJ: Growth models based on first principles or Phenomenology?. Funct Ecol. 2004, 18: 188-196. 10.1111/j.0269-8463.2004.00857.x.View ArticleGoogle Scholar
Copyright
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.