# A mechanistic model of infection: why duration and intensity of contacts should be included in models of disease spread

- Timo Smieszek
^{1}Email author

**6**:25

https://doi.org/10.1186/1742-4682-6-25

© Smieszek; licensee BioMed Central Ltd. 2009

**Received: **14 August 2009

**Accepted: **17 November 2009

**Published: **17 November 2009

## Abstract

### Background

Mathematical models and simulations of disease spread often assume a constant per-contact transmission probability. This assumption ignores the heterogeneity in transmission probabilities, e.g. due to the varying intensity and duration of potentially contagious contacts. Ignoring such heterogeneities might lead to erroneous conclusions from simulation results. In this paper, we show how a mechanistic model of disease transmission differs from this commonly used assumption of a constant per-contact transmission probability.

### Methods

We present an exposure-based, mechanistic model of disease transmission that reflects heterogeneities in contact duration and intensity. Based on empirical contact data, we calculate the expected number of secondary cases induced by an infector (i) for the mechanistic model and (ii) under the classical assumption of a constant per-contact transmission probability. The results of both approaches are compared for different basic reproduction numbers *R*_{0}.

### Results

The outcomes of the mechanistic model differ significantly from those of the assumption of a constant per-contact transmission probability. In particular, cases with many different contacts have much lower expected numbers of secondary cases when using the mechanistic model instead of the common assumption. This is due to the fact that the proportion of long, intensive contacts decreases in the contact dataset with an increasing total number of contacts.

### Conclusion

The importance of highly connected individuals, so-called super-spreaders, for disease spread seems to be overestimated when a constant per-contact transmission probability is assumed. This holds particularly for diseases with low basic reproduction numbers. Simulations of disease spread should weight contacts by duration and intensity.

## Keywords

## Background

Research has shown that the arrangement of potentially contagious contacts among the individuals of a society is a determining factor of disease spread: Both the repetition and the clustering of contacts diminish the size of an outbreak compared to a random mixing model [1–3]. Further, the epidemic threshold is low if the degree distribution shows a high dispersion [4, 5]. In contrast to the vast body of literature that exists on the importance of network structure, only little emphasis has been put on the *quality* of such potentially contagious contacts, i.e. how long they last and how intensive they are. In fact, mathematical models and computer simulations of disease propagation often assume a constant per-contact transmission probability [cf. [4], [6], e.g.: [7–10]]. This approach ignores that, for instance, a short random encounter of two persons on a public bus is less likely to transmit a certain communicable disease than a rendezvous that lasted several hours.

Treating all contacts equally may lead to an overestimation of the individual transmission probability in cases of short, non-intense contacts and an underestimation in cases of intense, prolonged contacts. Allowing for heterogeneous transmission probabilities may then affect the model behaviour in various ways (e.g., altering the shape of the epidemic curves or changing the predictions of the effectiveness of intervention measures). In particular, the valuation of certain "risk groups," such as so-called super-spreaders defined as highly connected individuals [6], may change.

Several authors have already introduced heterogeneous transmission probabilities in their models. To do so, field data was typically analysed statistically to extract differences due to age, the susceptible individuals' immune responses, the levels of infectiousness of the infectors, and different contact situations [11–14]. For instance, in their model for Ebola epidemics, Legrand et al. differentiated the infection potential of hospital, funeral, and community settings [15], while Ferguson et al. distinguished household and non-household contacts in their model for an influenza pandemic [14]. The disadvantage of such *a posteriori* statistical models is that they become invalid when their underlying determinants (e.g., how individuals interact with other individuals) change.

Only few epidemic simulations model infection processes mechanistically (i.e., based on an *a priori* model instead of purely statistical analysis) to determine the transmission probability of differing contact situations: Alexandersen et al. [16] and Sørensen et al. [17], for example, show that basing large scale simulation models on quantities, such as intensity and duration of an exposure to infectious material, is possible and expedient. Existing mechanistic transmission models applied in simulations of disease propagation focus almost exclusively on aerosol transmission, but do not cover transmission by droplets and physical contact ("close contact"). Hence, simple mechanistic models of close contact contagion that can be used in simulations of disease spread are needed.

This paper is intended to highlight why mechanistic models of disease transmission are needed, to provide an example of how they can be built, and to show how they differ from the often-used transmission model that assumes a constant per-contact transmission probability. The proposed mechanistic approach for including the heterogeneity of transmission probabilities into disease spread simulations concentrates exclusively on diseases that are transmitted via close contact between an infector and a susceptible individual. We build on the fundamental knowledge that the risk of disease transmission is not only a function of the infectivity of the infectious agent and the quality of the immune response but also of the host's exposure to a specific infectious agent [18, 19]. Particularly, we present evidence suggesting that the common assumption that highly connected individuals act as super-spreaders [6, 20, 21] might be misleading.

## Methods and Material

In this section, we first describe a formula that models transmission probabilities based on mechanistic considerations. Then, we introduce and describe an empirical data set of self-reported contacts qualified to transmit infectious disease. This data set was used to test the impact of the proposed transmission model. Finally, we introduce the scheme that describes how the outcome of both transmission models, i.e., the proposed mechanistic model assuming exposure dependency and the classical model assuming equally weighted contacts, were compared. Subsequently, we will refer to the first transmission model as the "mechanistic model" and the second model as the "classical model."

### A mechanistic transmission model

The probability of contracting a disease is closely linked to exposure to infectious organisms. A susceptible individual can only become infected if she/he is exposed to infectious organisms. Thereby, the transmission probability increases with an increase in the number of infectious organisms to which a susceptible individual is exposed. Subsequently, we refer to exposure as the cumulative, average amount of infectious medium ingested by a susceptible individual within a time period of interest due to close contact with an infectious person.

We base our proposed transmission model on the exponential relationship between the ingested dose and the infection risk as derived in Haas et al. [18] and used in several other publications [22–24]. Details describing how the following assumptions 1, 3, and 5 translate into an exponential dose-response model can be found in Haas et al. [18]. As an extension to this general formulation of an exponential relation between exposure and the risk of infection, we extrapolate the actual exposure from information about the duration and intensity of a contact between an infector and a susceptible individual. The proposed mechanistic model is based on the following underlying assumptions:

1. In principle, one infectious organism is sufficient to cause infectious disease. This hypothesis has been repeatedly supported by various studies against the alternative hypothesis assuming a threshold dose of infectious organisms must be passed to cause infection [19, 25, 26].

2. Every ingested infectious organism has a certain probability to survive until it reaches its target tissue and can initiate infection [18, 27].

3. We assume that this survival probability is a constant, i.e., factors like the susceptible hosts' immune responses are assumed to be equally effective for all individuals. This assumption is a simplification of reality since susceptibility is known to differ between individual hosts [28]. However, for the purpose of this paper, such a simplification that keeps the model and the interpretation of its results manageable is justified.

4. The average dose of infectious material that is ingested by an individual is a linear function of the duration and intensity of the contact with an infectious individual. Research has shown that these measures are good predictors for individual attack rates of SARS [29]. In theory, we recognize that contact can be any kind of interaction between two individuals that is sufficient to exchange body fluids that can carry infectious particles. However, for reasons of manageability and measurability, we concentrate on conversational and physical contacts.

5. The actual amount of infectious organisms ingested by an individual follows a Poisson probability distribution with the average dose (defined in assumption 4) as parameter [18, 19]. Thereby, we model the total (i.e., cumulative) average dose ingested during an entire simulation time step. This can lead to biased results in extreme cases [30], but given the fact that this assumption has proven to work well in the past and considering other uncertainties, utilizing this simplification is justified.

*n*becomes infected during simulation time step

*t*

_{ x }can be derived as

where *I* is the total number of infectors;
[*s*^{-1}] is the shedding rate (~microbial load) of infector *m* at simulation time step *t*_{
x
};
[1] is the contact intensity between the infector and the susceptible individual, which corresponds with the proportion of infectious material spread by infector *m* that is actually ingested by *n*; and
[*s*] is the time individuals *n* and *m* actually interact during time step *t*_{
x
}. Finally, Θ is a calibration parameter that accounts for all relevant factors that are not explicitly represented, such as survival probability of the infectious agent. Simulation models can be fitted to measured epidemiological data, such as epidemic curves, or to targeted reproduction rates by means of Θ. We used Θ to achieve predefined reproduction rates for the contact structure introduced in the following section.

### Empirical contact structure

Basic information about the sample and the contact structure

Gender of participants | |
---|---|

Female | 27 (50.9%) |

Male | 26 (49.1%) |

| |

Mean and standard deviation | 37.48 ( |

Min | 20 |

25% percentile | 24 |

50% percentile | 29 |

75% percentile | 52.25 |

Max | 76 |

| |

Student | 21 (39.6%) |

Employed | 35 (66.0%) |

Neither student nor employed | 11 (20.8%) |

| |

Mean and standard deviation | 9.92 ( |

Min | 0 |

25% percentile | 4 |

50% percentile | 8 |

75% percentile | 13 |

Max | 51 |

Time categories and translation into concrete values

Category in diary | Time value used for calculations |
---|---|

less than 5 min | 2.5 min |

5-15 min | 10.0 min |

15-60 min | 37.5 min |

1-2 h | 90.0 min |

2-4 h | 180.0 min |

more than 4 h | 360.0 min |

One diary had to be revoked due to deficient data quality; three of the remaining 53 participants provided only information for 5, 7, or 8 days, resulting in a total of 720 different person days with 7145 reported contact partners. In 36 of 7145 records, the information about contact duration was missing. These missing values were imputed based on probability distributions observed for the complete records. The processed data is provided in Additional File 1.

### Test setting for transmission models

In the results section, we compare how the proposed mechanistic transmission model differs from the classical model assuming an equal transmission probability for all contacts. Thereby, both the contact structure and the basic reproduction number *R*_{0} are fixed for both transmission models. We use the classical definition of *R*_{0} as the average number of secondary cases generated by an infected individual being introduced into a fully susceptible population [4].

*m*. We further concentrate on hypothetical diseases with an infectious period of one day and basic reproduction numbers

*R*

_{0}= 1.5, 3.0, 4.5, and 6.0. With these assumptions, the contact intensity and the shedding rate can be included in a new calibration parameter , and Equation 1 can be simplified to

*SC*generated by a specific infector

*m*if introduced into a completely susceptible population can then be calculated as follows:

*S*represents the total number of susceptible individuals infector

*m*has contact with during the day

*m*is infectious. Finally, the equation

reveals the basic reproduction number as defined previously when *X* includes the total population of interest.

The following two analyses are used to contrast the effect of the mechanistic model (Equation 2) against the classical model:

1) We illustrate the relationship between the expected number of secondary cases *SC* and the number of contacts *S* by calculating *SC* for the 720 person days as separate units of observation. *SC* is calculated according to Equations 2 and 3 and based on the contact durations measured with the contact diaries. We group the *SC*-values by *S* and show the so grouped *SC*-values in box plots. We do this for different values of Θ'; Θ' is determined such that *R*_{0} = 1.5, 3.0, 4.5, and 6.0 for the given test population according to Equation 4. The contact intensity *i* and the shedding rate *q* are assumed to be constants. We then compare the number of secondary cases *SC* of the simplified mechanistic model with the analogue *SC* value when the assumption of a constant per-contact transmission probability is used (also grouped by *S*).

2) In the second analysis, we calculate how the contact intensity is related to the duration of a contact in the empirical data set of potentially contagious contacts. This allows a qualitative discussion related to how the inclusion of variable contact intensities instead of a constant might affect the results found in analysis 1.

## Results

1) Unsurprisingly, the expected number of secondary cases *SC* tends to be higher for highly connected individuals than for those with only few contacts.

2) For low contact numbers, the median expected number of secondary cases
and the number of susceptible contact partners *S* appear to be linearly related. For high contact numbers, the gradient
/*S* is less steep than for low contact numbers.

3) As a disease becomes more infectious, the relationship between
and *S* seems to come closer to linearity. In Figure 1a (*R*_{0} = 1.5),
seems to reach a more or less stable plateau for *S* > 10, while in Figure 1d (R_{0} = 6.0),
appears to be an almost linear function of *S*. This impression is supported by regression analysis: If *S* is used as independent variable in a linear regression model to explain *SC*, the variance explained by this linear model equals 0.249 for *R*_{0} = 1.5, 0.339 for *R*_{0} = 3.0, 0.493 for *R*_{0} = 4.5 and 0.696 for *R*_{0} = 6.0 (all four linear regression analyses refuse the null hypothesis *R*^{2} = 0 on a significance level of *p* < 0.01 using a F-test).

*S*and

*R*

_{0}. The average deviations were normalized by the basic reproduction number

*R*

_{0}. Figure 2 reveals that individuals with less than 11 contacts have a slightly higher number of expected secondary cases when the transmission model depends on contact duration as compared to the case of a constant per-contact transmission probability. At the same time the classical model exceeds the mechanistic one in reference to highly connected individuals. The slight differences in case of individuals with less than 11 contacts can compensate for the rather pronounced differences of highly connected individuals as the majority of the person days reported eight or less contacts while highly connected individuals are rather seldom.

*τ*= 0.388, which is significantly different from zero at the 0.01 level.

## Discussion

### Implications of the results presented

The presented results elucidate the implications of accounting for contact duration and intensity in simulations of disease spread. Figure 2 suggests that the importance of highly connected individuals, so-called super-spreaders, is strongly overestimated when all contacts are assumed to be equally likely to transmit infectious disease. This finding is particularly important because some well cited publications have concluded that highly connected individuals are major drivers of disease spread without accounting for the heterogeneity of the inter-individual transmission probabilities [20, 21]. The results suggest that in the case of a disease with a low reproduction number, the expected secondary cases induced by individuals with many contacts are in the same range as those induced by individuals with medium numbers of contacts. Only when *R*_{0} is close to the mean number of contacts
is the expected number of secondary cases approximately linearly related to the number of contacts (see Figure 1 and the linear regressions shown in the results section).

This finding can be easily explained by the fact that the marginal total contact time decreases with every further contact person. In other words, most people have only a small set of persons (usually at home or at work) with whom they meet and interact for long periods during a day. Those individuals who meet with far more people than the average spend on average less time with every single contact person than those persons who have some or only a few contact partners per day. This can be illustrated with the example of train conductors, flight attendants, or supermarket cashiers; indeed, all of them have contact with hundreds of people a day, but they interact with each single contact only for a very short time.

As a consequence, highly connected individuals have more potentially contagious contacts than others, but these contacts are simultaneously on average less likely to transmit disease. Highly connected persons can reach their full "super-spreading" potential only if a disease is so contagious that almost every contact with a susceptible person leads to infection. Similar findings have been reported for sexually transmitted diseases: Research has shown that individuals with many different sexual partners per year are less important for disease propagation than often assumed because they have less sex acts per partner and in total than individuals with a smaller number of partners [32, 33].

The conclusion that highly connected individuals are overestimated in their importance if a constant per-contact transmission probability is assumed is further supported by the analysis of the contact intensity as reported in the contact study. Theoretically, a short interaction between a susceptible and an infectious person could lead to a comparable amount of ingested infectious material as that of a long interaction assuming that the short interaction is more intensive than the long one. However, prolonged contacts tend to be more intensive than short contacts because they more often involve closer interaction, such as physical contact and kisses. This finding is plausible because those persons with whom the individuals spend much time are in most cases their loved ones, thereby indicating the higher likelihood of more intimate interactions than with casual acquaintances. As a result, the conclusions from the analysis of the pure contact durations are even further pronounced by taking contact intensities into account.

Therefore, our results suggest that sole concentration on the connectedness of individuals to explain super-spreading events is not valid. The explanation for super-spreading events might lie in a combination of many contacts and high shedding rates (cf. the notion of "super-shedder" [6]). Extreme numbers of secondary cases can only be achieved when the shedding rate
of an infector *m* is much higher than the average shedding rate and only if this infector *m* has many susceptible contacts *S*.

### Limitations

We see three limitations in our study. First, the empirical data set used to test the proposed exposure-based transmission model is rather small and not representative of the population. Furthermore, the person days used to calculate secondary cases are not statistically independent from each other as every person participating in the study contributed diary entries for several days. Finally, contact patterns are dependent on the cultural background and may look differently in Italy, Germany, Thailand, or Sudan [34]. Thus, the generalizability of our results may be questioned. Although this limitation exists, it is not likely to bias the presented results in a relevant manner. The observed contact patterns are plausible and theoretically grounded. An increasing number of contact partners per time unit naturally results in a decrease in the time spent with each single contact partner. Additionally, most people plausibly have only a very limited set of persons with whom they interact very closely. Additionally, the attributes of our contact structure are in complete agreement with other empirical studies on potentially contagious contacts that have also addressed similar attributes [34].

Secondly, the six time categories of the diary study offer rather imprecise information on the actual time that two persons interacted, and the three intensity categories are too vague to be translatable into concrete values for use in Equation 1. Hence, the results presented have to be qualified in a quantitative rather than qualitative sense. For every time category, we defined a precise value (the arithmetic mean of the upper and lower boundaries) that was used for all calculations. However, a sensitivity analysis that alters the actual duration defined for every category within the given boundaries does not lead to qualitatively different results (see Additional File 2). Although the measured intensity indicator is not sufficiently precise to allow inclusion in a mathematical sense, the analysis clearly indicated that inclusion of contact intensity would amplify the observed phenomena rather than falsify our conclusions.

Finally, this paper makes statements about the expected number of secondary cases of infected individuals in a fully susceptible population. In a simulation model of disease spread, the importance of an individual also depends on her/his position within the contact network structure; i.e., the network position of every individual determines the likelihood of becoming infected as well as the susceptibility status of the surrounding individuals. Due to the complex nature of simulation models of disease spread, complete simulation models must be designed and tested for sensitivity to the changed transmission model proposed in order to allow precise statements on the impact of exposure-based transmission models on simulation outcomes.

## Conclusion

The goal of this paper was to provide evidence for the need of exposure-dependent transmission models and to suggest a mechanistic transmission model that can be used in simulations of disease spread. One remarkable result is that individuals with many contact partners seem to be less important for the transmission of diseases that are transmitted by droplets or physical contact than suggested by the classical assumption that all contacts are equally infectious. Particularly with only slightly infectious diseases, contacts should be differentiated by their potential to transmit infection when simulating disease spread.

This paper proposes an approach that enables the replacement of the problematic assumption of equally weighted contacts or purely statistical approaches to differentiate potentially contagious contacts with a mechanistic model. The proposed transmission model is based on well-established dose-response models that were developed in microbiology and builds upon assumptions that are closer to reality and better justifiable than the assumption that all contacts have the same transmission potential.

The spread of infectious disease is governed by a complex interplay of social and biological factors and to fully grasp its dynamics, processes on both the individual and the population level have to be understood [35, 36]. Therefore we suggest including *a priory*, mechanistic models in simulations of disease spread and combining them with an *a posteriori*, statistical approach: Often data is available that allows fitting a simulation model that includes such mechanistic elements to empirical data, thereby making use of the advantages of both approaches.

## Declarations

### Acknowledgements

This work was funded by the Swiss National Science Foundation (project 320030-114122). The data was collected by Judith Maag and Ladina Muggler. Mirjam Kretzschmar kindly provided the original questionnaires of one of their contact studies. Nicola Low, Janneke Min-Heijne, Adrian Röllin and Fredrik Liljeros supported and improved this research at different stages with their valuable comments. Further, I am indebted to the members of my research group at ETH Zurich, in particular Roland W. Scholz, Michael Stauffacher and Corinne Moser, and to Lena Fiebig (Swiss Tropical Institute) whose comments helped to further elaborate this paper. I thank the anonymous referees for their helpful and constructive remarks. Sandro Bösch helped with the final layout of the figures.

## Authors’ Affiliations

## References

- Smieszek T, Fiebig L, Scholz RW: Models of epidemics: when contact repetition and clustering should be included. Theor Biol Med Model. 2009, 6: 11-10.1186/1742-4682-6-11.PubMed CentralView ArticlePubMedGoogle Scholar
- Eames KTD: Modelling disease spread through random and regular contacts in clustered populations. Theor Popul Biol. 2008, 73: 104-111. 10.1016/j.tpb.2007.09.007.View ArticlePubMedGoogle Scholar
- Keeling MJ: The effects of local spatial structure on epidemiological invasions. Proc Biol Sci. 1999, 266 (1421): 859-867. 10.1098/rspb.1999.0716.PubMed CentralView ArticlePubMedGoogle Scholar
- Anderson RM, May RM: Infectious diseases of humans: dynamics and control. 1991, Oxford, UK: Oxford University PressGoogle Scholar
- Hethcote HW, Yorke JA: Gonorrhea transmission dynamics and control. 1984, Berlin: SpringerView ArticleGoogle Scholar
- Keeling MJ, Rohani P: Modeling infectious diseases in humans and animals. 2008, Princeton, NJ: PrincetonGoogle Scholar
- Sertsou G, Wilson N, Baker M, Nelson P, Roberts MG: Key transmission parameters of an institutional outbreak during the 1918 influenza pandemic estimated by mathematical modelling. Theor Biol Med Model. 2006, 3: 38-10.1186/1742-4682-3-38.PubMed CentralView ArticlePubMedGoogle Scholar
- Zinsstag J, Roth F, Orkhon D, Chimed-Ochir G, Nansalmaa M, Kolar J, Vounatsou P: A model of animal-human brucellosis transmission in Mongolia. Prev Vet Med. 2005, 69: 77-95. 10.1016/j.prevetmed.2005.01.017.View ArticlePubMedGoogle Scholar
- Murray JD: Simple epidemic models and practical applications. Mathematical biology I: An introduction. Edited by: Murray JD. 2002, New York, NY: Springer, 319-327. 3Google Scholar
- Kermack WO, McKendrick AG: Contributions to the mathematical theory of epidemics. Proc R Soc Lond. 1927, 115A: 700-721.View ArticleGoogle Scholar
- Auranen K, Eichner M, Leino T, Takala AK, Makela PH, Takala T: Modelling transmission, immunity and disease of
*Haemophilus influenzae*type b in a structured population. Epidemiol Infect. 2004, 132: 947-957. 10.1017/S0950268804002493.PubMed CentralView ArticlePubMedGoogle Scholar - Balenghien T, Chalvet-Monfray K, Bicout DJ, Sabatier P: Modelling and determination of the transmission contact rate for contagious bovine pleuropneumonia. Epidemiol Infect. 2005, 133: 337-342. 10.1017/S0950268804003498.PubMed CentralView ArticlePubMedGoogle Scholar
- Nishiura H, Eichner M: Infectiousness of smallpox relative to disease age: estimates based on transmission network and incubation period. Epidemiol Infect. 2007, 135: 1145-1150.PubMed CentralPubMedGoogle Scholar
- Ferguson NM, Cummings DA, Fraser C, Cajka JC, Cooley PC, Burke DS: Strategies for mitigating an influenza pandemic. Nature. 2006, 442 (Suppl): 448-452. 10.1038/nature04795.View ArticlePubMedGoogle Scholar
- Legrand J, Grais RF, Boelle PY, Valleron AJ, Flahault A: Understanding the dynamics of Ebola epidemics. Epidemiol Infect. 2007, 135: 610-621. 10.1017/S0950268806007217.PubMed CentralView ArticlePubMedGoogle Scholar
- Alexandersen S, Brotherhood I, Donaldson AI: Natural aerosol transmission of foot-and-mouth disease virus to pigs: minimal infectious dose for strain O
_{1}Lausanne. Epidemiol Infect. 2002, 128: 301-312.PubMed CentralPubMedGoogle Scholar - Sørensen JH, Mackay DKJ, Jensen CO, Donaldson AI: An integrated model to predict the atmospheric spread of foot-and-mouth disease virus. Epidemiol Infect. 2000, 124: 577-590. 10.1017/S095026889900401X.PubMed CentralView ArticlePubMedGoogle Scholar
- Haas CN, Rose JB, Gerba CP: Quantitative microbial risk assessment. 1999, New York, NY: John Wiley & SonsGoogle Scholar
- Wells WF: Airborne contagion and air hygiene. An ecological study of droplet infections. 1955, Cambridge, MA: Harvard University PressGoogle Scholar
- Pastor-Satorras R, Vespignani A: Epidemic spreading in scale-free networks. Phys Rev Lett. 2001, 86: 3200-3203. 10.1103/PhysRevLett.86.3200.View ArticlePubMedGoogle Scholar
- Kiss IZ, Green DM, Kao RR: Infectious disease control using contact tracing in random and scale-free networks. J R Soc Interface. 2006, 3: 55-62. 10.1098/rsif.2005.0079.PubMed CentralView ArticlePubMedGoogle Scholar
- Riley EC, Murphy G, Riley RL: Airborne spread of measles in a suburban elementary school. Am J Epidemiol. 1978, 107: 421-432.PubMedGoogle Scholar
- Nicas M, Sun G: An integrated model of infection risk in a health-care environment. Risk Anal. 2006, 26: 1085-1096. 10.1111/j.1539-6924.2006.00802.x.View ArticlePubMedGoogle Scholar
- Chen SC, Chang CF, Liao CM: Predictive models of control strategies involved in containing indoor airborne infections. Indoor Air. 2006, 16 (6): 460-481. 10.1111/j.1600-0668.2006.00443.x.View ArticleGoogle Scholar
- Meynell GG, Stocker BAD: Some hypotheses on the aetiology of fatal infections in partially resistant hosts and their application to mice challenged with
*Salmonella paratyphi-B*or*Salmonella typhimurium*by intraperitoneal injection. J Gen Microbiol. 1957, 16: 38-58.View ArticlePubMedGoogle Scholar - Rubin LG: Bacterial colonization and infection resulting from multiplication of a single organism. Rev Infect Dis. 1987, 9: 488-493.View ArticlePubMedGoogle Scholar
- Armitage P, Meynell GG, Williams T: Birth-death and other models for microbial infection. Nature. 1965, 207: 570-572. 10.1038/207570a0.View ArticlePubMedGoogle Scholar
- Armitage P, Spicer CC: The detection of variation in host susceptibility in dilution counting experiments. J Hyg (Lond). 1956, 54 (3): 401-414. 10.1017/S0022172400044661.View ArticleGoogle Scholar
- Rea E, Lafleche J, Stalker S, Guarda BK, Shapiro H, Johnson I, Bondy SJ, Upshur R, Russell ML, Eliasziw M: Duration and distance of exposure are important predictors of transmission among community contacts of Ontario SARS cases. Epidemiol Infect. 2007, 135: 914-921. 10.1017/S0950268806007771.PubMed CentralView ArticlePubMedGoogle Scholar
- Pujol JM, Eisenberg JE, Haas CN, Koopman JS: The effect of ongoing exposure dynamics in dose response relationships. PLoS Comput Biol. 2009, 5: 10.1371/journal.pcbi.1000399.Google Scholar
- Mikolajczyk RT, Akmatov MK, Rastin S, Kretzschmar M: Social contacts of school children and the transmission of respiratory-spread pathogens. Epidemiol Infect. 2008, 136: 813-822. 10.1017/S0950268807009181.PubMed CentralView ArticlePubMedGoogle Scholar
- Britton T, Nordvik MK, Liljeros F: Modelling sexually transmitted infections: The effect of partnership activity and number of partners on R0. Theor Popul Biol. 2007, 72: 389-399. 10.1016/j.tpb.2007.06.006.View ArticlePubMedGoogle Scholar
- Nordvik MK, Liljeros F: Transmission of sexually transmitted infections. Sex Transm Dis. 2006, 33: 342-349. 10.1097/01.olq.0000194601.25488.b8.View ArticlePubMedGoogle Scholar
- Mossong J, Hens N, Jit M, Beutels P, Auranen K, Mikolajczyk R, Massari M, Salmaso S, Sacla Tomba G, Wallinga J, Heijne J, Sadkowska-Todys M, Rosinska M, Edmunds WJ: Social contacts and mixing patterns relevant to the spread of infectious diseases. PLoS Med. 2008, 5 (3): e74-10.1371/journal.pmed.0050074.PubMed CentralView ArticlePubMedGoogle Scholar
- Koopman JS: Infection transmission science and models. Jpn J Infect Dis. 2005, 58 (6): S3-S8.PubMedGoogle Scholar
- Vickers DM, Osgood ND: A unified framework of immunological and epidemiological dynamics for the spread of viral infections in a simple network-based population. Theor Biol Med Model. 2007, 4: 49-10.1186/1742-4682-4-49.PubMed CentralView ArticlePubMedGoogle Scholar

## Copyright

This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

## Comments

View archived comments (1)